Sprung Floors for Indoor Hockey courts

When choosing the best floor for indoor hockey pitches, hockey centres, hockey halls. or multi purpose sports halls you need a hardwood sports floor that allows players to perform at their best, it has to be safe easy to maintain and long lasting.

Hockey players ask a lot from the floor. They must be able to trust it to have the right level of slip resistance so they have complete control as they move fast around the court.

Safety is important too. An indoor sprung hockey floor must be shock absorbing to protect the players from impact injuries and falls. The right level of shock absorption enables players to perform at their best.

Hockey is a fast game therefore the indoor hockey floor must have a uniform colour so the hockey court lines can easily be seen. Junckers 22mm solid hardwood sports floors are ideal; they are available in a choice of grades, selected for uniformity of colour.

Indoor hockey sticks will not scratch or scuff the surface of a Junckers sports floor. The lacquered finish is extremely durable and easy to maintain. Roller Hockey, Rink Hockey or In-Line Hockey won’t harm the wood floor either. Modern non marking skate wheels used indoors will not damage or scuff the floor surface, and the lacquer used on Junckers wooden floors has the perfect level of friction for indoor hockey trainers or skates. Compared with point elastic polyurethane and cushioned vinyl floors a solid hardwood floor offers very low rolling resistance; a characteristic that is and is strongly preferred by skaters.

Wooden Hockey Court Floors

Junckers offers a range of solid hardwood indoor hockey floor systems, recommended for all levels of play, from grass roots to elite level. Junckers SylvaSport and SylvaTech Plus floorboards used in combination with one of Junckers tested and approved sprung batten systems provides the perfect hockey playing surface.

Junckers Sprung floor Systems for Hockey courts

SylvaSport and SylvaTech solid beech floors are the ideal choice, selected for their uniformity of colour, superior strength, durability and longevity.

Indoor Hockey Flooring, Technical Standards

Indoor hockey will usually be played on a floor that complies with EN 14904 for multi purpose sports floors. The standard measures shock absorption, surface friction and visual characteristics, along with vertical deformation and ball bounce. Junckers has a wide range of area elastic floor systems that comply with EN 14904 categories A3 and A4, and with the sports floors design advice provided by Sport England and SportScotland.

Hockey wood Floor Solutions

In order to provide the best indoor hockey surface Junckers offers a range of resilient sports floor systems to suit different construction heights and types of subfloor, all providing a high quality sprung floor. For refurbishments with restricted floor height the Junckers Clip system provides a sprung overlay floor. Junckers BluBat and UnoBat 45 floors are foam backed batten systems that offer simple construction with a high level of performance. If the designer wishes to omit the screed the New Era and UnoBat 62+ levelling systems are easy to install on uneven subfloors such concrete slabs. Also for uneven subfloors, Junckers DuoBat 120+ system is a levelling system which offers an elite performance level.

Portable Hockey hardwood Floors

Junckers Portable Sports Floors are the most versatile sports floors in the range. If you need the performance of a high quality sports floor with the versatility of a portable system Junckers Portable A3 and Pro Complete 44 portable floor systems will deliver this, and still with the beauty of solid hardwood. A Junckers portable hockey floor can be teamed up with a set of portable side boards to enclose the playing area.

Easy Cleaning and Maintenance of your indoor Hockey Floor

Maintenance of a Junckers volleyball court is simple. On a daily basis, it is more than enough to use a scrubber-dryer machine with a low dosage of water. To keep the floor in optimal condition, we offer maintenance products such as resin remover, degreaser and mild soap products.

Additionally, we produce our own sports lacquer. The lacquer is approved in accordance with the European sports standard EN 14904 and has a high ability to bond with the existing surface. This means that only a light screening of the floor is needed before refreshing with one coat of our sports lacquer. If years of hard wear require a more comprehensive refinishing, it is possible to sand the floor down for complete restoration. If a sports floor is regularly maintained, sanding down to bare wood is rarely necessary.

Solid Hardwood Hockey Flooring - Certified wood and caring for the indoor climate

Junckers only use wood from forests managed in a sustainable and environmentally responsible way. Planting new trees as old ones are cut down is one of the characteristics of sustainable forestry. To protect the climate, we strive to use wood harvested as close as possible to our factory. This is why our raw wood is mainly sourced from forest areas in Denmark, Sweden, Germany and Poland.

Junckers achieved Chain of Custody certification in 2006 and has since been able to offer PEFC certified products. In 2010, we also achieved certification under the FSC® scheme.

Furthermore, we have a wide range of wood flooring and woodcare products that carry the Danish Indoor Climate Label. The Indoor Climate Label is your guarantee that the products do not have odours or chemical substances that can adversely affect the air quality in the room.

Pre-Finished Surface

Junckers solid hardwood floor systems are ready to use as soon as they are installed as they are factory-lacquered. This makes them fast to install and cost-effective, and the installer and builder can progress quickly with the project. For the client there will be no delays and the hockey court will be ready for use when planned. A solid hardwood floor offers unbeatable life cycle costs and the initial cost will be less that a similar synthetic floor finish, with all the low carbon and environmental benefits that solid hardwood brings.

Sub-construction: The foundation for your hockey court

Sub-construction refers to the underlying structure that supports the playing surface of a hockey court. The sub-construction of a hockey floor plays a critical role in the overall performance and safety of the court. A well-constructed sub-floor and sub-structure provide a stable foundation for the playing surface, ensuring that the court remains level and does not warp or buckle over time. They also help to absorb shock and reduce the impact on players' joints, helping to prevent injuries.

At Junckers you can choose between a wide variety of sub-constructions that will fit any need you might have.


Complete system control

Junckers subflooring, sports flooring, game line paint, and urethane top coats are all developed, manufactured, quality controlled, and warrantied by Junckers.  

100% Solid Hardwood

Junckers produces only 100% solid hardwood, for a long life span and avoids the risk of veneer layers delaminating

Improved hardness

Junckers flooring is press-dried, which improves hardness and dimensional stability.

Pre-finished from factory

Junckers Indoor Hockey wood floors are pre-finished at our factory, allowing for quicker, and cleaner installations.  

Exclusive Double Dove Tail

Industry exclusive Double Dove Tail construction improves stability and allows for ultra-precision milling.

In accordance with the European
standard EN 14904

The solutions fulfil the requirements of class A3 and A4.